profiles search for area_of_expertise: Analog: Layout

152 results

Wonyoung Kim

CEO of PineS Corp., Established in 1999, ASIC Design Service & Full Custom Layout Service.

Amr Walid

Experienced Mixed Signal Design Engineer with a demonstrated history of working in the semiconductors industry. Skilled in Data Conversion, Analog Circuit Design, CMOS and Mixed Signal. Strong engineering professional with a Master's degree focused in Electronics Engineering from Ain Shams University.

Jiabin.Lv

physical design engineer. 7 years experience of backend design.

LAUDE ANDRES FERNANDEZ MARTINEZ

Electronics Engineer, passionate about science with strong technical and interpersonal skills for working in a team and successfully completing a project.

Hasith Ishara

Graduated 4 tears back in engineering specialized in electronics and telecommuniation engineering with a first class. Now I am working at a startup as the team lead of the embedded design team. I am also a postgraduate student in Msc in wireless communication engineering course. Creon Solutions is my freelancer name. I do image processing, PCB and circuit designs ...etc in Freelancer.com

Antonio Agripino

Master's student at UFCG. Work with Cadence tools. I work with AMS and digital circuits (using Verilog language) and analog layout as well.

Caspar van VRoonhoven

>10 years of experience in precision analog and sensor interface IC design.

Khalid Ali Eissa

Fresh grad electronics engineer and a beginner circuits designer who admires analog/RF IC design. Former intern at ADI© (Egypt) and recently a junior Analog IC designer at Si-Ware Systems (Egypt). My GP was a 5G Transceiver in the band 26.5GHz - 29.5GHz, I designed the upconversion mixer (core circuit, power combiner, LO driver).

Mohamed Hassaneen Abd-elghafar Hassaneen Amer

I am an Analog design engineer graduated from Ain-shams university in 2018. My graduation project was to design a Decision Feedback Equalizer in a 10 Gb/s serial link transceiver, starting from building the circuit from scratch to layout and post layout simulations and system integration.

SKILLS

AREA OF EXPERTISE

Mahmoud Youssuf Ahmad

Graduate student of ECE department Ain Shams University, and Currently Master Student of ECE department Cairo University with major of Electronics design.

Angel Abusleme

Associate professor at Pontificia Universidad Catolica de Chile, analog and mixed-signal design

nik2402

I am an electronic hobbyist who enjoys building different electronic circuits and systems.

Mohamed Hassaneen Abd-elghafar Hassaneen Amer

I am an IC designer graduated from faculty of engineering at Ain-shams university in EGYPT in 2018, Now I am a reserch assistant at the IC laboratory of Ain-shams university. My graduation project was to design a decision feedback equalizer (DFE) of a high speed serial link transceiver form scratch to post layout simulations and system integration.

SKILLS

AREA OF EXPERTISE

KADAR A A

I am researcher with goals of developing high end technologies for the future.

Arun Kumar V

4+ years of VLSI Backend experience. Working as Physical Design Engineer. Expertise in Analog layouts, physical verification and Physical Design. Open to learn and explore other domains of VLSI design.

AGhani

Associate Professor (Electrical and Electronic Engineering) Implantable chip design Low power sensors

MADAN S

Analog circuit designer with passion in taking challenges .Interest in ADC,DAC,PLL,SDADC,LDO.Done layout of all these blocks.

Camillo

Experienced Analog Design Engineer with strong background in HV CMOS ASICs.

Dejan Mirkovic

Electronics Engineer and Researcher with a demonstrated history of working in the higher education industry. Skilled in CAD/EDA tools for ASIC, PCB and FPGA design, scripting and programming. Education professional with a PhD in Electrical Engineering and Computer Science from University of Nis, Faculty of Electronic Engineering Nis, Serbia.

HUGO DANIEL HERNANDEZ

Hugo Hernández received his B.S. degree in Electronic Engineering from The Industrial University of Santander, Colombia in 2005 and M.S. degree in Electrical Engineering from Polytechnic School of the University of São Paulo (EPUSP), Brazil in 2008. Hugo obtained his Ph.D degree in Electrical Engineering from University of São Paulo in 2015. He was Mixed Signal IC designer at LSITEC and DFCHIP (Brazil) where worked for 8 years, and Pos-doc of the Universidad de Sao Paulo in collaboration with ALICE-CERN as analog IC designer in the SAMPA ASIC project. He was Adjunct Professor of the Control and Automation course at the Engineering Institute (CUVG) of UFMT for 2 years. He is currently Adjunct Professor of the Department of Electrical Engineering of the Federal University of Minas Gerais (UFMG).

James Swonger

"Lifer" IC designer focused on analog and power management for applications you don't want to know about

Saul Rodriguez

I am Assistant Professor in Bio-Electronics. My research interests include analog mixed-signal ICs for medical applications, RFIC, and ultra-low power circuits.

Ajit Kumar

SKILLS

AREA OF EXPERTISE

Shwetha

Analog Circuit and Layout Engineer

Azhar Din

Passionate about engineering and electronics. Love teaching and mentoring. Highly experience in analogue and RF electronics and enjoy managing projects.

Rod

I'm an engineer with experience in analog IC design both in private companies as well as academia. Experienced in design of delay locked loop(DLL), clock recovery, field detectors, voltage limiters, operational amplifiers, current mirrors, bandgap reference and so on.

David Garner

An experienced mixed-signal IC design engineer / design manager with over 25 years experience. Has design and led the design of multiple mixed-signal ICs through to tapeout and silicon verification. Also experienced with the delivery of IP blocks. Worked across multiple market sectors.

Murat Eskiyerli

I am an experienced semiconductor expert with twenty years of experience both in top semiconductor companies such as Sony, National Semiconductor, Analog Devices, and Cambridge Silicon Radio and much smaller companies such as Pericom and Theta Microelectronics. I designed high-volume products for customers including Quantum, Western Digital, Hewlett-Packard and Nokia. I also acted as an expert evaluator for European Union H2020 framework project calls and EURIPIDES research frameworks. Specialities: CMOS/BiCMOS, SOI CMOS analogue and radio-frequency integrated circuit design: Millimetre-wave phase shifters, vector modulators, attenuators, Phased-array transceivers, LNA (Bluetooth, FM, 802.11n) Mixer (100MHz to 4GHz) Limiting Amplifiers for optical communication circuits, Transimpedance Amplifiers, Low-power RF Amplifiers Hard-disk preamplifiers, Clock and Data Recovery (CDR) circuits, High-speed output drivers (CML), Sigma-delta converters. Xtal Oscillators, Ultra-low power CMOS circuits for RFID transponders CMOS RF-DC Energy Harvesting circuits

Shahbaz Abbasi

Design engineer with combined R&D and industrial experience in developing analog/mixed signal ICs for applications including inductive position sensors and imager readouts. Proven abilities with widely used blocks including (but not limited to) filter, amplifier, ADC, DAC, voltage regulators, bandgap reference, ring/LC oscillator, comparator and custom digital logic circuitry. Experience with full tape-out flow including schematic design, analog/mixed-signal simulations, floor planning, layout, system-level verification and chip measurements. Strong familiarity with industry standard tools and instruments used for design, verification and testing such as Cadence, Synopsys, Mentor Graphics, and Keysight. Frontend digital hardware design (ASIC/FPGA) experience using Verilog HDL. Considerable exposure to ASIC backend flow (synthesis and PnR) using Synopsys Design Compiler and Cadence Innovus. Skilled with programming platforms such as MATLAB, C++, C#, Perl, UNIX Shell and VB. Strong education with Ph.D. and MSc. degrees in Electronics Engineering along with several peer-reviewed articles in IEEE journals.

riri hu

SKILLS

AREA OF EXPERTISE

Arshad Hussain

Currently working as Assistant Professor, Quaid-i-Azam University, Islamabad, Pakistan.

Wasim

Masters in "Integrated Circuits & Systems" focused on Analog / Mixed Signal System/ IC design

Paulo Marcio Moreira e Silva

Adjunct professor at Federal University of Itajuba in Itabira, Brazil. Experience in the design of Analog and RF integrated circuits.

Ram Pratap Aditham

Engineering Consultant with 20 years of experience in RF and Analog Circuit Design

Amro Tork

More than 14 years of experience in Electronic Design Automation roles with leading industry companies like Intel, Samsung and others. Have a strong background in EDA best practices and technologies like DRC, LVS, XRC, PERC and others. Have a mixed background in circuit. design, data science and programming with emphasis on data analysis for microchip design. Have strong background leading project deliveries to fortune 100 companies in the world. B.Sc. in Electrical Engineering from faculty of Engineering, Ain Shams University, Cairo, Egypt.

Vipul Kumar Sharma

Analog IC design engineer

Yashas L.R

Graduate Student and Research Assistant at the MM-Wave, THZ and Photonics Lab (MTP), Arizona State University

Santunu Sarangi

An energetic semiconductor professional with varied experience in the field of research, teaching and IC design. 📌 More than 6 years of experience in analog and mixed signal IC design. 📌 3 years of mentoring experience in analog circuit and layout design. 📌 Been part of the 4 complete IC development project. 📌 Inventor and co-inventor of 2 patents (filed) in the field of high-speed data path communication. 📌 Published few research papers with more than 30 engineering citations. 📌 6 month experience as a lead role in standard cell library development in a leading semiconductor organisation. 📌 more than 4 years of teaching experience in under-graduate electronics engineering courses.

Bertrand PIGEARD

Hello, I'm an IC Designer Analog/RF with digital skills. I worked mainly on PLL for mobile tranceivers. I used to work on Cadence Design flow for 20 years.

Mark Martin

Principal Staff Engineer, ASIC Design and Development, Chief Technologist, JHU/APL Space Exploration Sector, Electronic Systems Engineering group

Deepgandha Shete

M.Tech (VLSI Design and Embedded System) Actively looking for opportunities in the VLSI field

SKILLS

AREA OF EXPERTISE

Lucas Heraldo Duarte

Engineering Electronic student of National University of Cordoba (UNC), Argentina. Active member of Robust Circuits and Systems Laboratory (LCSR), in exact and natural sciences faculty (FCEFyN).

Prachi Mrudula

Be the someone among everyone who pioneers everyone to be a someone !

Angel Abusleme

Analog circuit designer. Nerd.

Mohit R

Graduate equipped with a Bachelor of Engineering in Electronics and communication with a concentration in Semiconductor and VLSI design with hands-on experience in CAD tools and to join a reputable organization to begin a fulfilling, lifelong career.

AREA OF EXPERTISE

Malcolm Smith

IC designer with more than 25 years post Ph.D. experience. Specialising in RF, RFIC, analog and mixed-signal. Wide experience in Architecture, system and circuit design. RF front-end module design for cellular with CMOS PA. Over 40 patents issued.

Feroz Ahmed Choudhary

physical design engineer

AREA OF EXPERTISE

Anton Moiseev

Analog Circuit Design

SKILLS

Juha Häkkinen

Ph.D. in electrical engineering, 25 years experience in mixed-signal IC design

Astria Nur Irfansyah

Lecturer, Department of Electrical Engineering Institut Teknologi Sepuluh Nopember INDONESIA

Diego Hernando

Analog IC Desing Masters Student. Currently learning about PLL desing

Vishal Saxena

Mixed-Signal Integrated Circuits instructor and researcher.

Gaurav Kumar K

PhD Student, School of Electrical and Computer Engineering, Purdue University, USA. Research interests include Mixed Signal Circuits, High Speed Circuits and Digital System Design

Nathan Boulet

I started my passion a year ago, I was supposed to do my radio-ham license but it has been postponed. So in the meantime instead of just waiting I started to learn about signal processing. I bought an SDR, built my antenna a (double cross), then I bought a yagi 70cm - 2m. I also designed my upconverter to be able to get a bunch of different ranges that my SDR would not catch. I'm now building a cubesat Simulator. Using a raspberry pi and an STM32.

Estevao Coelho Teixeira

I am a professor at Federal University of Juiz de Fora (UFJF). I'm interested on analog and mixed-signal integrated circuits, as well as analog and digital electronics and microprocessors.

Patrick Degenaar

I am a professor of Neuroprosthetics at Newcastle University. My primary interest is in developing implantable medical devices to treat neurological conditions.

Milind Potdar

Microelectronics Enthusiastic, Vast experience in embedded design for various domains.